Smart Meters Measure Peak Time Electricity Use

An inside view of the state-of-the-art electronics that make the new electric meters so smart. The devices will communicate with electric department computers allowing customers to monitor their power usage.

Brandon Richardson of the Water Valley Electric Department displays one of the 400 meters waiting for installation at the warehouse on Gore Circle. Once installed the department will be about half way toward their goal of providing the new “smart” meters to the city’s 1500-plus electricity customers. – Photos by Jack Gurner
Reporter
WATER VALLEY – Eventually city utility customers will be able to monitor their use of electricity and water online. But, the change isn’t happening overnight.
Electric department workers began replacing old meters with new “smart” meters in August of last year and, at the time, expected to have to new technology in place by now. And, although they are behind their own schedule, they are still way ahead of other cities.
Electric Department Manager Andy Hall said that out of TVA’s 158 distributors more than half haven’t even started. “We’ve got 350-something meters in with another 400 sitting on the floor ready to be put in.”
That would take care of about half of the department’s 1500-plus customers, he added.
In the meantime, TVA has pushed back their plan to begin billing at “time-of-use” rates. This peak-time billing was set to begin in October, but probably is another year away, Hall said. “I think it is going to be at least October of next year.”
The city’s water department has installed a few more than 50 of their “smart” meters. But, Water Department Superintendent Morris Surrette expected the process to be a bit slower since workers have to dig up the old meter to put in the new one. “If everything goes well, 30 to 45 minutes to put the meter in the ground.”
Saving Money
Both types of meters will save consumers money either directly – by allowing peak-time use of electricity to be monitored – or indirectly – by lowering costs to the utility for fuel and labor expenses.
Jerry Johnson, Territory Manager for Mueller Systems, the company supplying the metering equipment, told the Herald last year that the cost of electricity is going up because TVA is limited in how much they can produce and supply to customers.
“The only way to address that is to charge “time-of-use” rates during peak times when most electricity is being used. That’s when they are going to charge customers the most,” he said.
The “time-of-use” rate structure varies between seasons and during different times of the day; afternoon in the summer is the highest cost period, early morning in the winter is the second highest cost period, and spring and fall are the lowest cost periods.
Saving money will require some effort on the part of consumers who will have to change their lifestyle and the way they operate appliances in their home. To help track usage, Johnson’s company supplies software at no additional charge that provides a consumer portal on the Internet. Customers will be able to view their electrical power usage on a daily and hourly basis. They will also be able to get an email or text message when certain levels of usage have been reached.
But, those customers who don’t have the Internet can still save money by using a common sense approach to their electrical consumption. For example, if the customer has been washing and drying clothes during the afternoon during peak usage time, they can move that task to later in the evening – off peak – and lower their cost.
The new meters also save money for both the electric and water departments by providing readings directly to the business office. No longer will a meter-reader be required to go house to house and utility service can be turned on and off from the office. The system will also report power outages and water leaks and pinpoints their location.
